# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile.am - Top-level Makefile.am for Sympa
# RCS Identication ; $Revision: 4718 $ ; $Date: 2007-12-05 16:37:14 +0100 (mer, 05 déc 2007) $ 
#
# Sympa - SYsteme de Multi-Postage Automatique
# Copyright (c) 1997, 1998, 1999, 2000, 2001 Comite Reseau des Universites
# Copyright (c) 1997,1998, 1999 Institut Pasteur & Christophe Wolfhugel
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

#SUBDIRS = src doc wwsympa nls
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
	ChangeLog INSTALL NEWS config.guess config.sub install-sh \
	missing mkinstalldirs
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BINDIR = @BINDIR@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = -g
CGIDIR = @CGIDIR@
CONFDIR = @CONFDIR@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CVS2CL = @CVS2CL@
CYGPATH_W = @CYGPATH_W@
DATADIR = @DATADIR@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOCDIR = @DOCDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETCDIR = @ETCDIR@
EXEEXT = @EXEEXT@
EXPLDIR = @EXPLDIR@
GROUP = @GROUP@
INITDIR = @INITDIR@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBDIR = @LIBDIR@
LIBEXECDIR = @LIBEXECDIR@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LOCALEDIR = @LOCALEDIR@
LOCKDIR = @LOCKDIR@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAJOR_VERSION = @MAJOR_VERSION@
MAKEINFO = @MAKEINFO@
#RPMTOPDIR	=	/usr/src/redhat
MANDIR = @MANDIR@
MHONARC = @MHONARC@
MICRO_VERSION = @MICRO_VERSION@
MINOR_VERSION = @MINOR_VERSION@
MSGFMT = @MSGFMT@
NEWALIASES = @NEWALIASES@

# NEWALIASES_ARG	=	hash:/etc/mail/sympa_aliases
NEWALIASES_ARG = @NEWALIASES_ARG@
OBJEXT = @OBJEXT@
OPENSSL = @OPENSSL@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PIDDIR = @PIDDIR@
POSTMAP = @POSTMAP@

# POSTMAP_ARG	=	hash:/etc/mail/sympa_virtual
POSTMAP_ARG = @POSTMAP_ARG@
SAMPLEDIR = @SAMPLEDIR@
SBINDIR = @SBINDIR@
SCRIPTDIR = @SCRIPTDIR@
SENDMAIL_ALIASES = @SENDMAIL_ALIASES@
SET_MAKE = @SET_MAKE@
SH = @SH@
SHELL = @SHELL@
SPOOLDIR = @SPOOLDIR@
STRIP = @STRIP@
SUDO = @SUDO@
SUIDPERL = @SUIDPERL@
USER = @USER@
VERSION = @VERSION@
VIRTUAL_ALIASES = @VIRTUAL_ALIASES@
ac_ct_CC = @ac_ct_CC@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
enable_secure = @enable_secure@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
HOST = `$(PERL) -MSys::Hostname -e "printf '%s', Sys::Hostname::hostname();"`
COOKIE = `$(PERL) -e " print int(rand ( time ))  "`
PERL_VERSION = `$(PERL) -e ' print $$]'`
SYMPA_VERSION = @VERSION@
DIR = ${prefix}
EXPL_DIR = @EXPLDIR@
MAILERPROGDIR = @BINDIR@
RPMTOPDIR = `rpm --eval %_topdir`
WWSBINDIR = $(BINDIR)
PIDPRE = pidof -x
PIDPOST = 
SSLCERTDIR = $(EXPL_DIR)/X509-user-certs

# Aix4.2 (and some others unix), use gnu make !
#MAKE	=	@MAKE@

# FreeBSD hier(7) structure and locations
# by Autrijus Tang 2001/10/11
#ifeq ($(shell uname), FreeBSD)
#	PIDPRE	= 	ps -ax | grep
#	PIDPOST	= 	| grep perl | head -n 1 | cut -f 2 -d " "
#	LOCKDIR	= 	/var/spool/lock
#	RPMTOPDIR	=	/usr/local/src/redhat
#	OPENSSL	=	/usr/bin/openssl
#endif
CONFIG = $(CONFDIR)/sympa.conf
WWSCONFIG = $(CONFDIR)/wwsympa.conf
ETCBINDIR = @DATADIR@
main_SRC = AUTHORS COPYING ChangeLog INSTALL KNOWNBUGS NEWS README

#ifeq ($(shell uname), Linux)
#	LOG_SOCKET_TYPE="inet"
#else
LOG_SOCKET_TYPE = unix
all: all-am

.SUFFIXES:
am--refresh:
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
uninstall-info-am:
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am:

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am

.PHONY: all all-am am--refresh check check-am clean clean-generic dist \
	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
	distcheck distclean distclean-generic distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-exec \
	install-exec-am install-info install-info-am install-man \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-info-am


ChangeLog:
	@CVS2CL@
#endif

all:	warning checkperl checkcpan sources wrapper soap_wrapper man locale

rpm: build_rh_rpm build_mdk_rpm

warning:
	@echo "######################## W A R N I N G ######################"; \
	echo "## If it is the first time you install Sympa on this server :"; \
	echo "##        It may take a while...."; \
	echo "## The reason is that Sympa requires many Perl modules that"; \
	echo "## are not distributed with the standard Perl distribution."; \
	echo "## We'll try to install these modules automatically..."; \
	echo "## If some modules cannot be installed automatically, (probably" ; \
	echo "## because of the 'make test'), try downloading them from the"; \
	echo "## CPAN website (http://search.cpan.org) and install them manually."; \
	echo "#############################################################"; \
	echo -n "Please hit <Enter> to proceed"; \
	if [ "$(DESTDIR)" = "" ]; then read rep; fi

checkperl:
	@if [ $(PERL_VERSION) = '5.006' ]; then \
	echo "##################################"; \
	echo "## You are using Perl version $(PERL_VERSION) :"; \
	echo "## You need to patch your syslog.pm "; \
	echo "## See http://bugs.perl.org/perlbug.cgi?req=bidmids&bidmids=20000712.003"; \
	echo "##"; \
	echo "## If your Perl version is 5.6.0 AND if your system is Solaris :"; \
	echo "## See also http://bugs.perl.org/perlbug.cgi?req=bidmids&bidmids=20000522.003"; \
	echo "#############################################################################"; \
	if [ "$(DESTDIR)" = "" ]; then read rep; fi \
	fi
	@if [ ! -f $(SUIDPERL) ]; then \
		echo "#################################################################################"; \
		echo "## wwsympa.fcgi that provides Sympa's web interface needs to run as user $(USER)"; \
		echo "## There are many options to do so : "; \
		echo "##  1/ Installing 'suidperl' to run wwsympa.fcgi with SetUID. This is the default method,"; \
		echo "##     but it might be insecure."; \
		echo "##  2/ Use 'sudo' to run wwsympa.fcgi as user $(USER). Your Apache configuration should use wwsympa_sudo_wrapper.pl"; \
		echo "##     You should edit your /etc/sudoers file (with visudo command) as follows :"; \
		echo "##     apache ALL = ($(USER))  NOPASSWD: $(CGIDIR)/wwsympa.fcgi"; \
		echo "##  3/ Use Apache's suExec mode."; \
		echo "## For (2) and (3) you should run Sympa's 'configure' with the '--enable-secure' option"; \
		echo "#######################################################################################"; \
		echo -n "Please hit <Enter> to continue"; \
		if [ "$(DESTDIR)" = "" ]; then read rep; fi \
	fi
	@if [ ! -f $(MSGFMT) ]; then \
		echo "##################################"; \
		echo "## You don't have msgfmt installed. It is required to build message catalogues"; \
		echo "## msgfmt is provided with a 'gettext' package on most systems..."; \
		echo "#####################################################"; \
		if [ "$(DESTDIR)" = "" ]; then read rep; fi \
	fi

sources: src/Makefile src/queue.c src/bouncequeue.c src/aliaswrapper.c
	@echo "Making src"
	@(cd src && echo "making in src..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' WWSBINDIR='${WWSBINDIR}' \
	MAILERPROGDIR='${MAILERPROGDIR}' ETCBINDIR='${ETCBINDIR}' ETCDIR='${ETCDIR}' \
	CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
	USER='${USER}' GROUP='${GROUP}' \
	SENDMAIL_ALIASES='${SENDMAIL_ALIASES}' \
	VIRTUAL_ALIASES='${VIRTUAL_ALIASES}' \
	NEWALIASES='${NEWALIASES}' NEWALIASES_ARG='${NEWALIASES_ARG}' \
	POSTMAP='${POSTMAP}' POSTMAP_ARG='${POSTMAP_ARG}' \
	PIDPRE='${PIDPRE}' PIDPOST='${PIDPOST}' LOCKDIR='${LOCKDIR}');

wrapper: src/Makefile src/queue.c src/bouncequeue.c src/aliaswrapper.c
	@echo "Making wwsympa"
	@(cd wwsympa && echo "making in wwsympa..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' WWSYMPA='${CGIDIR}/wwsympa.fcgi');

soap_wrapper: src/Makefile src/queue.c src/bouncequeue.c src/aliaswrapper.c
	@echo "Making sympa_soap"
	@(cd soap && echo "making in soap..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' SYMPASOAP='${CGIDIR}/sympa_soap_server.fcgi');

documentation: doc/sympa.tex.tpl doc/Makefile 
	@echo "Making documentation"
	@(cd doc && echo "making in doc/..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' CGIDIR='${CGIDIR}' \
	DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' WWSBINDIR='${WWSBINDIR}' \
	MAILERPROGDIR='${MAILERPROGDIR}' ETCBINDIR='${ETCBINDIR}' ETCDIR='${ETCDIR}' PIDDIR='${PIDDIR}' \
	CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' EXPL_DIR='${EXPL_DIR}' LOCALEDIR='${LOCALEDIR}' SPOOLDIR='${SPOOLDIR}' \
	SCRIPTDIR='${SCRIPTDIR}' \
	USER='${USER}' GROUP='${GROUP}');

man: doc/man8/Makefile
	@echo "Making man"
	@(cd doc/man8 && echo "making in doc/man8/..." && \
	$(MAKE) SYMPA_VERSION='$(SYMPA_VERSION)');

checkcpan: 
	@echo "Checking needed CPAN modules ..."
	$(PERL) ./check_perl_modules.pl

clean:
	find . \( -name ".#*" -o -name "*~" -o -name ".*~" -o -name "#*#" \) -exec  rm -f {} \;
	@for i in src wwsympa src/etc/sample;\
	do \
	(cd $$i && echo "making clean in $$i..." && \
	$(MAKE) PERL='${PERL}' clean) || exit 1; \
	done;

install: importantchanges installdir installsrc installwws installwebtt2 installmailtt2 installlocale installman installscript installsample installconfig installdoc installsoap nextstep

nextstep: 
	@echo ""
	@echo "#########################################################"
	@echo "# If you install Sympa for the first time on this server"
	@echo "# you should check the INSTALL file."
	@echo "#"
	@echo "# If you are upgrading, you now need to run"
	@echo "#    $(SBINDIR)/sympa.pl --upgrade"
	@echo "#######################################################"

importantchanges:
	@( 	PERL=$(PERL); export PERL; \
		UMASK=0600; export UMASK; \
		DESTDIR=$(DESTDIR); export DESTDIR; \
		BINDIR=$(SBINDIR); export BINDIR; \
		SBINDIR=$(SBINDIR); export SBINDIR; \
		LIBDIR=$(LIBDIR); export LIBDIR; \
		ETCDIR=$(ETCDIR); export ETCDIR;\
		USER=$(USER); export USER;\
		GROUP=$(GROUP); export GROUP;\
		SYMPA_VERSION=$(SYMPA_VERSION); export SYMPA_VERSION; \
		$(PERL) ./important_changes.pl \
	) ;

locale:
	@(cd po && echo "making in po/...." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' LOCALEDIR='${LOCALEDIR}' ETCBINDIR='${ETCBINDIR}' \
	DESTDIR='${DESTDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
	SCRIPTDIR='${SCRIPTDIR}' \
	USER='${USER}' GROUP='${GROUP}') || exit 1;

installlocale:
	@(cd po && echo "making install in po/...." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' LOCALEDIR='${LOCALEDIR}' ETCBINDIR='${ETCBINDIR}' \
	DESTDIR='${DESTDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
	USER='${USER}' GROUP='${GROUP}' install) || exit 1;

updatelocale:
	@(cd po && echo "make update-po in po/...." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' LOCALEDIR='${LOCALEDIR}' ETCBINDIR='${ETCBINDIR}' \
	DESTDIR='${DESTDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
	SCRIPTDIR='${SCRIPTDIR}' \
	USER='${USER}' GROUP='${GROUP}' update-po) || exit 1;

installsrc:
	@(cd src && echo "making in src..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' SYMPA_VERSION='${SYMPA_VERSION}' \
	DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' WWSBINDIR='${WWSBINDIR}' \
	DESTDIR='${DESTDIR}' MAILERPROGDIR='${MAILERPROGDIR}' EXPL_DIR='${EXPL_DIR}' LIBEXECDIR='${LIBEXECDIR}' \
	PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' LOCALEDIR='${LOCALEDIR}' SCRIPTDIR='${SCRIPTDIR}' \
	ETCBINDIR='${ETCBINDIR}' ETCDIR='${ETCDIR}' SENDMAIL_ALIASES='${SENDMAIL_ALIASES}' \
	VIRTUAL_ALIASES='${VIRTUAL_ALIASES}'  HOST='${HOST}' COOKIE='${COOKIE}' \
	SPOOLDIR='${SPOOLDIR}' LOG_SOCKET_TYPE='${LOG_SOCKET_TYPE}' \
	SSLCERTDIR='${SSLCERTDIR}' \
	PODIR='${prefix}/po' \
	USER='${USER}' GROUP='${GROUP}' newinstall) || exit 1;

installdoc:
	@(cd doc && echo "make install in doc..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' DOCDIR='${DOCDIR}' ETCBINDIR='${ETCBINDIR}' \
	DESTDIR='${DESTDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
	SENDMAIL_ALIASES='${SENDMAIL_ALIASES}' \
	VIRTUAL_ALIASES='${VIRTUAL_ALIASES}' \
	USER='${USER}' GROUP='${GROUP}' install) || exit 1;

installwws:
	@(cd wwsympa && echo "making in wwsympa..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' \
	USER='${USER}' GROUP='${GROUP}' SUDO='${SUDO}' enable_secure='${enable_secure}' \
	CGIDIR='${CGIDIR}' WWSBINDIR='${WWSBINDIR}' MAILERPROGDIR='${MAILERPROGDIR}' \
	PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' ETCBINDIR='${ETCBINDIR}' \
	DESTDIR='${DESTDIR}' USER='${USER}' GROUP='${GROUP}' newinstall) || exit 1;

installwebtt2:
	@(cd web_tt2 && echo "making in web_tt2..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' \
	USER='${USER}' GROUP='${GROUP}' \
	CGIDIR='${CGIDIR}' WWSBINDIR='${WWSBINDIR}' MAILERPROGDIR='${MAILERPROGDIR}' \
	PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' ETCBINDIR='${ETCBINDIR}' \
	DESTDIR='${DESTDIR}' USER='${USER}' GROUP='${GROUP}' newinstall) || exit 1;

installmailtt2:
	@(cd mail_tt2 && echo "making in mail_tt2..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' \
	USER='${USER}' GROUP='${GROUP}' \
	CGIDIR='${CGIDIR}' WWSBINDIR='${WWSBINDIR}' MAILERPROGDIR='${MAILERPROGDIR}' \
	PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' ETCBINDIR='${ETCBINDIR}' \
	DESTDIR='${DESTDIR}' USER='${USER}' GROUP='${GROUP}' newinstall) || exit 1;

installsoap:
	@(cd soap && echo "making in soap/..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' \
	USER='${USER}' GROUP='${GROUP}' SCRIPTDIR='${SCRIPTDIR}' \
	CGIDIR='${CGIDIR}' WWSBINDIR='${WWSBINDIR}' MAILERPROGDIR='${MAILERPROGDIR}' \
	PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' ETCBINDIR='${ETCBINDIR}' \
	DESTDIR='${DESTDIR}' USER='${USER}' GROUP='${GROUP}' newinstall) || exit 1;

installsample:
	@(cd src/etc/sample && echo "making in src/etc/sample..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' LOG_SOCKET_TYPE='${LOG_SOCKET_TYPE}' \
	DESTDIR='${DESTDIR}' DIR='${DIR}' SAMPLEDIR='${SAMPLEDIR}' \
	BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' \
	EXPL_DIR='${EXPL_DIR}' WWSBINDIR='${WWSBINDIR}' HOST='${HOST}' \
	CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' ETCBINDIR='${ETCBINDIR}' MAILERPROGDIR='${MAILERPROGDIR}' \
	COOKIE='${COOKIE}' OPENSSL='@OPENSSL@' SSLCERTDIR='${SSLCERTDIR}' \
	SPOOLDIR='${SPOOLDIR}' USER='${USER}' GROUP='${GROUP}' PIDDIR='${PIDDIR}' install) || exit 1;

installman:
	@(cd doc/man8 && \
	$(MAKE) PERL='${PERL}' DIR='${DIR}' DESTDIR='${DESTDIR}' SYMPA_VERSION='${SYMPA_VERSION}' MANDIR='${MANDIR}' \
	USER='${USER}' GROUP='${GROUP}' \
	CONFDIR='${CONFDIR}' SENDMAIL_ALIASES='${SENDMAIL_ALIASES}' VIRTUAL_ALIASES='${VIRTUAL_ALIASES}' UMASK='${UMASK}'  \
	MAILERPROGDIR='${MAILERPROGDIR}' PIDDIR='${PIDDIR}' SPOOLDIR='${SPOOLDIR}' PIDDIR='${PIDDIR}' ETCBINDIR='${ETCBINDIR}' \
	newinstall) || exit 1;

installscript:
	@(cd src/etc/script && echo "making in src/etc/script..." && \
	$(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
	DIR='${DIR}' DESTDIR='${DESTDIR}' SCRIPTDIR='${SCRIPTDIR}' \
	BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' \
	WWSBINDIR='${WWSBINDIR}' HOST='${HOST}' \
	CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' ETCBINDIR='${ETCBINDIR}' \
	MAILERPROGDIR='${MAILERPROGDIR}' PIDDIR='${PIDDIR}' \
	COOKIE='${COOKIE}' INITDIR='${INITDIR}' \
	PIDPRE='${PIDPRE}' PIDPOST='${PIDPOST}' LOCKDIR='${LOCKDIR}' \
	OPENSSL='@OPENSSL@' USER='${USER}' GROUP='${GROUP}' install) || exit 1;

installdir:
	@echo "Creating required directories"
	@for dir in $(DIR) $(EXPL_DIR) $(CONFDIR) $(SAMPLEDIR) $(ETCDIR) $(BINDIR) $(LOCALEDIR) $(DOCDIR) $(DIR)/static_content $(DIR)/static_content/icons ; do \
		if [ ! -d $(DESTDIR)$$dir ] ; then \
			echo "Creating $(DESTDIR)$$dir"; \
			mkdir -p $(DESTDIR)$$dir; \
			chown $(USER) $(DESTDIR)$$dir; \
			chgrp $(GROUP) $(DESTDIR)$$dir; \
			chmod 755 $(DESTDIR)$$dir; \
		fi \
	done
	@if [ ! -f $(DESTDIR)$(CONFDIR)/sympa.conf ] ; then \
	echo "First installation : installing conf directories..."; \
	for dir in create_list_templates mail_tt2 web_tt2 scenari \
	task_models general_task_models; do \
		if [ ! -d $(DESTDIR)$(ETCDIR)/$$dir ] ; then \
			echo "Creating $(DESTDIR)$(ETCDIR)/$$dir"; \
			mkdir -p $(DESTDIR)$(ETCDIR)/$$dir; \
			chown $(USER) $(DESTDIR)$(ETCDIR)/$$dir; \
			chgrp $(GROUP) $(DESTDIR)$(ETCDIR)/$$dir; \
		fi \
	done; \
	( \
		PERL=$(PERL); export PERL; \
		UMASK=0600; export UMASK; \
		INSTALLDIR=$(ETCDIR); export INSTALLDIR; \
		USER=$(USER); export USER;\
		GROUP=$(GROUP); export GROUP;\
		INSTALLNAME='README'; export INSTALLNAME; \
                ETCDIR=$(ETCDIR); export ETCDIR; \
                ETCBINDIR=$(ETCBINDIR); export ETCBINDIR; \
		$(PERL) ./subst.pl src/etc/README_etc \
	) \
	fi
	@if [ ! -f $(DESTDIR)$(CONFDIR)/sympa.conf ] ; then \
	echo "First installation : installing spool directories..."; \
	for dir in $(SPOOLDIR) $(SPOOLDIR)/msg $(SPOOLDIR)/digest $(SPOOLDIR)/moderation \
	$(SPOOLDIR)/expire $(SPOOLDIR)/auth $(SPOOLDIR)/outgoing $(SPOOLDIR)/tmp \
	$(SPOOLDIR)/task ; do \
		if [ ! -d $(DESTDIR)$$dir ] ; then \
			echo "Creating $(DESTDIR)$$dir"; \
			mkdir -p $(DESTDIR)$$dir; \
			chown $(USER) $(DESTDIR)$$dir; \
			chgrp $(GROUP) $(DESTDIR)$$dir; \
			chmod 770 $(DESTDIR)$$dir; \
		fi \
	done \
	fi
	@if [ ! -f $(DESTDIR)$(CONFDIR)/sympa.conf ] ; then \
	echo "First installation : creating archives and bounce directories..."; \
	for dir in bounce arc ; do \
		if [ ! -d $(DESTDIR)$(DIR)/$$dir ] ; then \
			echo "Creating $(DESTDIR)$(DIR)/$$dir"; \
			mkdir -p $(DESTDIR)$(DIR)/$$dir; \
			chown $(USER) $(DESTDIR)$(DIR)/$$dir; \
			chgrp $(GROUP) $(DESTDIR)$(DIR)/$$dir; \
		fi \
	done \
	fi

installconfig:
	mkdir -p $(DESTDIR)$(CONFDIR)
	@INITCONF='0'
	@for cfile in sympa.conf wwsympa.conf ; do \
	if [ ! -f $(DESTDIR)$(CONFDIR)/$$cfile ] ; then \
	echo "Installing sample config file $$cfile..."; \
	DESTDIR=$(DESTDIR); export DESTDIR; \
	$(PERL) -I $(DESTDIR)$(LIBDIR) $(DESTDIR)$(SBINDIR)/sympa_wizard.pl -c $$cfile; \
	chown $(USER) $(DESTDIR)$(CONFDIR)/$$cfile; \
	chgrp $(GROUP) $(DESTDIR)$(CONFDIR)/$$cfile; \
	if [ "$(DESTDIR)" = "" ]; then \
	INITCONF='1'; \
	fi \
	fi \
	done; \
	if [ "$$INITCONF" ] ; then \
	echo "###############################################"; \
	echo "It seems to be your first installation of Sympa"; \
	echo "The following wizard will help you create your $(CONFDIR)/sympa.conf and $(CONFDIR)/wwsympa.conf :"; \
	DESTDIR=$(DESTDIR); export DESTDIR; \
	$(PERL) -I $(DESTDIR)$(LIBDIR) $(DESTDIR)$(SBINDIR)/sympa_wizard.pl; \
	fi

build_rh_rpm: clean
	@echo "Building RedHat RPM in $(RPMTOPDIR) ..."
	@( \
		cd src/etc/script/ ; \
		PERL=$(PERL); export PERL; \
		UMASK=0600; export UMASK; \
		INSTALLDIR=$(RPMTOPDIR)/SPECS; export INSTALLDIR; \
		SUFFIX=''; export SUFFIX; \
		ZIPEXT='gz'; export ZIPEXT; \
		APPGROUP='System Environment/Daemons'; export APPGROUP; \
		MTA='smtpdaemon'; export MTA; \
		HOMEDIR='/var/sympa'; export HOMEDIR; \
		PIDDIR='/var/run/sympa'; export PIDDIR; \
		VERSION=$(SYMPA_VERSION); export VERSION; \
                CONFDIR='/etc'; export CONFDIR; \
                SENDMAIL_ALIASES='/etc/mail/sympa_aliases'; export SENDMAIL_ALIASES; \
                MAILERPROGDIR='/etc/smrsh'; export MAILERPROGDIR; \
		INITDIR='/etc/rc.d/init.d';  export INITDIR; \
                SPOOLDIR='/var/sympa/spool'; export SPOOLDIR; \
                BINDIR='/etc/smrsh'; export BINDIR; \
                SBINDIR='/var/sympa/sbin'; export SBINDIR; \
                DATADIR='/usr/share/sympa'; export DATADIR; \
                EXPLDIR='/var/sympa/expl'; export EXPLDIR; \
                LIBDIR='/usr/lib/sympa/bin'; export LIBDIR; \
                CGIDIR='/var/www/cgi-bin'; export CGIDIR; \
                LOCALEDIR='/usr/lib/sympa/locale'; export LOCALEDIR; \
		SCRIPTDIR='/var/sympa/bin'; export SCRIPTDIR; \
		LIBEXECDIR='/var/sympa/bin'; export LIBEXECDIR; \
		SAMPLEDIR='/usr/share/sympa/examples'; export SAMPLEDIR; \
                ETCDIR='/etc/sympa'; export ETCDIR; \
		$(PERL) ../../../subst.pl sympa.spec.rh80 \
	)
	mv $(RPMTOPDIR)/SPECS/sympa.spec.rh80 $(RPMTOPDIR)/SPECS/sympa.spec
	@( \
		cd ..; \
		tar -cvf $(RPMTOPDIR)/SOURCES/sympa-$(SYMPA_VERSION).tar sympa-$(SYMPA_VERSION); \
		gzip $(RPMTOPDIR)/SOURCES/sympa-$(SYMPA_VERSION).tar; \
	)
	rpmbuild  -ba $(RPMTOPDIR)/SPECS/sympa.spec

build_mdk_rpm: clean
	@echo "Building Mandrake RPM in $(RPMTOPDIR) ..."
	@( \
		cd src/etc/script/ ; \
		PERL=$(PERL); export PERL; \
		UMASK=0600; export UMASK; \
		INSTALLDIR=$(RPMTOPDIR)/SPECS; export INSTALLDIR; \
		SUFFIX='mdk'; export SUFFIX; \
		ZIPEXT='bz2'; export ZIPEXT; \
		APPGROUP='System/Servers'; export APPGROUP; \
		MTA='MailTransportAgent'; export MTA; \
		HOMEDIR='/var/lib/sympa'; export HOMEDIR; \
		VERSION=$(SYMPA_VERSION); export VERSION; \
                CONFDIR='/etc/sympa'; export CONFDIR; \
                SENDMAIL_ALIASES='/etc/mail/sympa_aliases'; export SENDMAIL_ALIASES; \
                MAILERPROGDIR='/usr/lib/sympa/bin'; export MAILERPROGDIR; \
                PIDDIR='/var/run/sympa'; export PIDDIR; \
		INITDIR='/etc/rc.d/init.d';  export INITDIR; \
                SPOOLDIR='/var/spool/sympa'; export SPOOLDIR; \
                BINDIR='/usr/lib/sympa/bin'; export BINDIR; \
                SBINDIR='/usr/lib/sympa/bin'; export SBINDIR; \
                DATADIR='/usr/share/sympa'; export DATADIR; \
                EXPLDIR='/var/lib/sympa/expl'; export EXPLDIR; \
                LIBDIR='/usr/lib/sympa/bin'; export LIBDIR; \
                CGIDIR='/var/www/cgi-bin'; export CGIDIR; \
                LOCALEDIR='/usr/lib/sympa/locale'; export LOCALEDIR; \
		SCRIPTDIR='/usr/lib/sympa/bin'; export SCRIPTDIR; \
		LIBEXECDIR='/usr/lib/sympa/bin'; export LIBEXECDIR; \
		SAMPLEDIR='/usr/share/sympa/examples'; export SAMPLEDIR; \
                ETCDIR='/etc/sympa'; export ETCDIR; \
		$(PERL) ../../../subst.pl sympa.spec \
	)
	@( \
		cd ..; \
		tar -cvf $(RPMTOPDIR)/SOURCES/sympa-$(SYMPA_VERSION).tar sympa-$(SYMPA_VERSION); \
		bzip2 $(RPMTOPDIR)/SOURCES/sympa-$(SYMPA_VERSION).tar; \
	)
	rpmbuild -ba $(RPMTOPDIR)/SPECS/sympa.spec

tag:	ChangeLog
	@if [ ! $(NEW_VERSION) ]; then \
	echo "Current version is $(VERSION)"; \
	echo "You need to define NEW_VERSION"; \
	else echo $(NEW_VERSION) > .version; cvs ci -m 'preparing $(NEW_VERSION)' .version ChangeLog; cvs tag -F `echo sympa-$(NEW_VERSION)|sed 's/\./_/g'`; \
	fi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: